Lift Truck Fundamentals Final Exam

Question 1 of 66

A simple way to describe center of gravity is:

The distance from the face of the fork carriage to the tip of the forks

Correct Incorrect Correct answer

The approximate weight of your forklift

Correct Incorrect Correct answer

The location at which an object will balance on a single point

Correct Incorrect Correct answer

The specific turning radius of a forklift

Correct Incorrect Correct answer

Question 2 of 66

What will happen if the center of gravity ever moves outside of the stability triangle?

The forklift will tip over

Correct Incorrect Correct answer

The stability of the forklift will be increased

Correct Incorrect Correct answer

The forklift’s fuel consumption will increase

Correct Incorrect Correct answer

Question 3 of 66

If a load’s center of gravity extends beyond the forklift’s rated load center:

The capacity of the forklift will increase

Correct Incorrect Correct answer

The capacity of the forklift will decrease

Correct Incorrect Correct answer

The forklift will immediately tip over, no matter the weight of the object

Correct Incorrect Correct answer

Question 4 of 66

The combined center of gravity of a forklift and its load:

Is constantly moving depending on many factors

Correct Incorrect Correct answer

Is always positioned beneath the forklift operator

Correct Incorrect Correct answer

Is impacted only by the speed at which the forklift is traveling

Correct Incorrect Correct answer

Question 5 of 66

The two most common types of forklift are:

Gas and diesel

Correct Incorrect Correct answer

Orange and yellow

Correct Incorrect Correct answer

New and used

Correct Incorrect Correct answer

Counterbalance and narrow aisle reach

Correct Incorrect Correct answer

Question 6 of 66

It is the responsibility of __________________ to ensure that supervisors are competent.

The government

Correct Incorrect Correct answer

The employer

Correct Incorrect Correct answer

The worker

Correct Incorrect Correct answer

The forklift training provider

Correct Incorrect Correct answer

Question 7 of 66

A complete forklift training program consists of:

Theory training, a knowledge evaluation, workplace specific training, a practical evaluation

Correct Incorrect Correct answer

Workplace specific training and an exam

Correct Incorrect Correct answer

Theory training and a knowledge evaluation

Correct Incorrect Correct answer

Question 8 of 66

The fulcrum of a counterbalance forklift is located:

At the tip of the forks

Correct Incorrect Correct answer

At the front wheels

Correct Incorrect Correct answer

Directly below the operator

Correct Incorrect Correct answer

Beneath the counter weight

Correct Incorrect Correct answer

Question 9 of 66

If damage or deficiencies are found during a pre-operational inspection:

Note it on your inspection documents and proceed to operate the equipment

Correct Incorrect Correct answer

Report the deficiencies in accordance with your company’s specific pre-operational inspection procedure

Correct Incorrect Correct answer

Call your local health and safety authority

Correct Incorrect Correct answer

Ignore it, especially is it’s something that’s been broken for a long time

Correct Incorrect Correct answer

Question 10 of 66

A significant difference between forklifts and regular automobiles is that forklifts are steered with their rear wheels. This results in:

Rear end swing that can unexpectedly strike an object or person

Correct Incorrect Correct answer

Improved stability

Correct Incorrect Correct answer

The ability to safely turn faster than a car

Correct Incorrect Correct answer

Question 11 of 66

It’s not necessary to look in the direction of travel if you’re only making very small movements. For example, it’s not necessary to look back every time when reversing while positioning your truck. The movements are very small .

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 12 of 66

The _______________ is responsible for making sure that protective devices and equipment are consistently being used by workers.

The government

Correct Incorrect Correct answer

The supervisor

Correct Incorrect Correct answer

The forklift training provider

Correct Incorrect Correct answer

The joint health and safety committee

Correct Incorrect Correct answer

Question 13 of 66

When placing a load onto your forks, you must engage it with at least ____________ of your forks.

1/4

Correct Incorrect Correct answer

1/3

Correct Incorrect Correct answer

1/2

Correct Incorrect Correct answer

2/3

Correct Incorrect Correct answer

Question 14 of 66

When entering and leaving the operator’s cab of our forklift, you should always:

Maintain three points of contact

Correct Incorrect Correct answer

Use the steering wheel to pull yourself up and steady yourself on the way down

Correct Incorrect Correct answer

Do so as quickly as possible to improve efficiency

Correct Incorrect Correct answer

Question 15 of 66

What’s the best height to maintain your forklift and your load while traveling.

As high as possible

Correct Incorrect Correct answer

As low as possible

Correct Incorrect Correct answer

Load height doesn’t matter when traveling

Correct Incorrect Correct answer

Question 16 of 66

Any forklift attachment can be used as long as it:

Is built by a certified welder

Correct Incorrect Correct answer

Is approved by the equipment manufacturer

Correct Incorrect Correct answer

Is cleared by your jurisdictions health and safety authority

Correct Incorrect Correct answer

Falls within your equipment’s capacity limitations

Correct Incorrect Correct answer

Question 17 of 66

If you need to use a forklift with controls, features, and attachments that you’re unfamiliar with:

Use it as long as it’s only for one or two lifts

Correct Incorrect Correct answer

Move all controls and functions to get a feel for it, then go ahead

Correct Incorrect Correct answer

Do not use it until you receive appropriate information, instruction, and training

Correct Incorrect Correct answer

Question 18 of 66

The highest percentage of forklift-related fatalities are due to:

Workers getting run over by a forklift

Correct Incorrect Correct answer

Individuals getting punctured by forks and bleeding to death

Correct Incorrect Correct answer

Operators getting crushed by a forklift when it tips over

Correct Incorrect Correct answer

Operators getting struck by falling loads

Correct Incorrect Correct answer

Question 19 of 66

You can operate any type of forklift after you’ve received Forklift Safety Training.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 20 of 66

Free lift is:

The maximum height your forks will go

Correct Incorrect Correct answer

The height the forks will reach before additional stages of the mast will extend

Correct Incorrect Correct answer

The amount the rear of the forklift raises off the ground when picking up a load that’s too heavy

Correct Incorrect Correct answer

Question 21 of 66

Select the correct option regarding traveling on inclines:

Travel up an incline forward while loaded and in reverse downhill when loaded

Correct Incorrect Correct answer

Travel up an incline in reverse while loaded and forward downhill when loaded

Correct Incorrect Correct answer

Question 22 of 66

Pre-operational inspections are not necessary as long as your maintenance department is doing periodic inspections and staying on top of things.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 23 of 66

Pre-operational inspections must be performed:

Before operating the equipment

Correct Incorrect Correct answer

Within one hour after operating the equipment

Correct Incorrect Correct answer

Once per week

Correct Incorrect Correct answer

One the day shift when there are lots of bosses around

Correct Incorrect Correct answer

Question 24 of 66

What is the best way to find a specific forklift’s lifting capacity?

Google it

Correct Incorrect Correct answer

Ask your coworkers

Correct Incorrect Correct answer

View the machine’s nameplate

Correct Incorrect Correct answer

Question 25 of 66

“Homemade” lifting devices can be used to lift and carry personnel as long as:

They are built by a certified welder

Correct Incorrect Correct answer

You have approval by an experienced forklift operator

Correct Incorrect Correct answer

There are no restrictions in the legislation on using homemade lifting devices

Correct Incorrect Correct answer

They have been approved by the manufacturer

Correct Incorrect Correct answer

Question 26 of 66

If your forklift has a load center rating of 24 inches, and you pick up a load that’s 60 inches long, what will happen:

The center of gravity of the load will be inside the machine’s load center rating

Correct Incorrect Correct answer

The center of gravity of the load will be outside of the machine’s load center rating

Correct Incorrect Correct answer

Question 27 of 66

As a load is raised on the forks:

The combined center of gravity will move forward

Correct Incorrect Correct answer

The combined center of gravity will rise

Correct Incorrect Correct answer

The combined center of gravity will move backwards

Correct Incorrect Correct answer

The combined center of gravity will remain where it is

Correct Incorrect Correct answer

Question 28 of 66

The heavier a load is, the further the center of gravity moves forward within the stability triangle.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 29 of 66

The center of gravity of an object is always located in the direct center of the object.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 30 of 66

Select the factor that can cause the combined center of gravity to move:

Turning the forklift

Correct Incorrect Correct answer

Braking

Correct Incorrect Correct answer

Tilting a load

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

Question 31 of 66

The fulcrum of a narrow aisle reach forklift is located:

At the tip of the forks

Correct Incorrect Correct answer

Beneath the operator

Correct Incorrect Correct answer

At the straddle wheels

Correct Incorrect Correct answer

There is no pivot point on a narrow aisle reach forklift

Correct Incorrect Correct answer

Question 32 of 66

You must never operate a forklift or any heavy machinery if you’ve consumed alcohol, taken drugs, medication or any other substance that could adversely affect your ability to safely operate the equipment.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 33 of 66

What should you do if you’re required to handle a load that obstructs your vision?

Honk your horn while traveling forward so that people will get out of the way

Correct Incorrect Correct answer

Drive in reverse if possible or use a spotter

Correct Incorrect Correct answer

Skip that load and get one that you can see over

Correct Incorrect Correct answer

Question 34 of 66

Forklift operators must receive training:

Within one month of operating a forklift

Correct Incorrect Correct answer

Every six months

Correct Incorrect Correct answer

Before beginning their duties as a forklift operator

Correct Incorrect Correct answer

Question 35 of 66

Every forklift has an operator’s manual that contains specific details about the forklift, and must be thoroughly reviewed prior to operating the equipment.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 36 of 66

The overhead guard on a forklift will protect the operator from:

Falling capacity loads

Correct Incorrect Correct answer

Small packages, boxes, and other materials

Correct Incorrect Correct answer

Forklift tip overs

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

Question 37 of 66

What PPE should be worn when working on our around propane equipment?

A respirator

Correct Incorrect Correct answer

Rubber boots

Correct Incorrect Correct answer

Gloves, eye protection, and other PPE that covers exposed skin

Correct Incorrect Correct answer

PPE is not required as long as you’re being careful

Correct Incorrect Correct answer

Question 38 of 66

What is the purpose of the pressure relief valve on a propane cylinder?

It is used to fill the propane cylinder

Correct Incorrect Correct answer

It allows you smell propane leaks

Correct Incorrect Correct answer

It releases pressure built-up due to heat expansion

Correct Incorrect Correct answer

Question 39 of 66

Propane can be dangerous because:

It is explosive

Correct Incorrect Correct answer

It can cause fires

Correct Incorrect Correct answer

It can easily cause frost bite

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

Propane is not dangerous

Correct Incorrect Correct answer

Question 40 of 66

A propane cylinder has a life of:

Propane cylinders last forever

Correct Incorrect Correct answer

1 Year

Correct Incorrect Correct answer

3 Years

Correct Incorrect Correct answer

10 – 12 Years

Correct Incorrect Correct answer

Question 41 of 66

You should inspect propane cylinders

Once per week

Correct Incorrect Correct answer

Annually

Correct Incorrect Correct answer

Prior to mounting and using on your forklift

Correct Incorrect Correct answer

Question 42 of 66

Select the option that’s correct.

Propane is lighter than air. It can rise up to ceiling level and be ignited by light bulb elements

Correct Incorrect Correct answer

Propane is heavier than air. It can settle to the floor and spaces below grade

Correct Incorrect Correct answer

Question 43 of 66

The government body who regulates workplace safety throughout Canada is:

Each Province

Correct Incorrect Correct answer

The Occupational Safety and Health Administration

Correct Incorrect Correct answer

The Industrial Truck Association

Correct Incorrect Correct answer

Question 44 of 66

You must report hazards:

Before the end of your shift

Correct Incorrect Correct answer

Before the end of the work week

Correct Incorrect Correct answer

As soon as you become aware of them

Correct Incorrect Correct answer

When you return from your break

Correct Incorrect Correct answer

Question 45 of 66

Personnel are allowed to ride on your forklift with you as long as you drive slowly and carefully.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 46 of 66

Who has the right of way?

Forklift operators

Correct Incorrect Correct answer

Pedestrians

Correct Incorrect Correct answer

Question 47 of 66

Seat belts must be worn in the following scenarios:

When traveling in your forklift

Correct Incorrect Correct answer

When handling capacity loads

Correct Incorrect Correct answer

Seat belts are not required

Correct Incorrect Correct answer

Seat belts must always be worn

Correct Incorrect Correct answer

Question 48 of 66

Because forklifts are extremely versatile, you will be able to perform all functions of your job using a single forklift.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 49 of 66

The stability trapezoid on a narrow aisle reach truck is very different that the stability triangle. On this type of truck, the center of gravity can move outside of the trapezoid, but the truck will not tip over.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 50 of 66

Select the option that displays the correct sequence of events relating to start up.

Start the forklift, perform a pre-operational inspection, perform a post start check

Correct Incorrect Correct answer

Perform a post start check, start the forklift, perform a pre-operational inspection

Correct Incorrect Correct answer

Perform a pre-operational inspection, start the forklift, perform a post start check

Correct Incorrect Correct answer

Question 51 of 66

Nose support systems or jack stands are not always required on semi-trailers that are not coupled to a tractor.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 52 of 66

What should you do if you find yourself in a tip over scenario?

Jump from the forklift as quickly as possible

Correct Incorrect Correct answer

Hold on, brace yourself, and lean in the opposite direction of the tip over

Correct Incorrect Correct answer

Press the accelerator all the way

Correct Incorrect Correct answer

Question 53 of 66

The risk of an empty forklift tipping over is lower than that of a forklift that’s loaded within it’s capacity.

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Question 54 of 66

This type of tire is generally used for indoor purposes on smooth and even surfaces.

Pneumatic tire

Correct Incorrect Correct answer

Pneumatic solid type tire

Correct Incorrect Correct answer

Sold tire

Correct Incorrect Correct answer

Cushion tire

Correct Incorrect Correct answer

Question 55 of 66

You should never leave combustion engine powered forklifts running indoors unnecessarily. What’s the main reason for this?

Gas is super expensive right now

Correct Incorrect Correct answer

It will wear them out quicker

Correct Incorrect Correct answer

CO can accumulate in the air resulting in the potential for CO poisoning

Correct Incorrect Correct answer

Question 56 of 66

Most of the options will result in an operator requiring “upgrade” training or retraining. Select the option that would not result in upgrade training being required.

Changes are made to equipment in the workplace

Correct Incorrect Correct answer

Operator deficiencies are discovered

Correct Incorrect Correct answer

Work conditions or legislation changes

Correct Incorrect Correct answer

An operator surpasses the three-year mark as an employee

Correct Incorrect Correct answer

Question 57 of 66

What position should the pressure relief valve been in when mounting the propane cylinder onto your forklift?

12 O’clock

Correct Incorrect Correct answer

3 O’clock

Correct Incorrect Correct answer

6 O’clock

Correct Incorrect Correct answer

9 O’clock

Correct Incorrect Correct answer

Question 58 of 66

Labels must contain a precautionary statement. A precautionary statement is:

A word used to emphasize a hazard

Correct Incorrect Correct answer

A brief description of the product

Correct Incorrect Correct answer

A phrase that describes recommended measures to ensure safety

Correct Incorrect Correct answer

Question 59 of 66

Labels must contain a hazard statement. A hazard statement will tell you:

Where to get more information

Correct Incorrect Correct answer

What the nature of the hazard is

Correct Incorrect Correct answer

The first aid measures that are required if the product gets on you

Correct Incorrect Correct answer

Who the supplier of the product is and how to call them

Correct Incorrect Correct answer

Question 60 of 66

If you encounter a product that has a damaged, obscured or missing label, you must:

Only use the product for a short period of time

Correct Incorrect Correct answer

Refrain from using the product and notify your supervisor immediately so that the product can be identified and labeled accordingly

Correct Incorrect Correct answer

Immediately refuse work

Correct Incorrect Correct answer

Question 61 of 66

If you see this pictogram, it means that the product:

Can eat through metal and your skin causing permanent damage

Correct Incorrect Correct answer

Contains compressed gas

Correct Incorrect Correct answer

Can provide the oxygen needed to further fuel a fire

Correct Incorrect Correct answer

Has the ability to explode if shaken or stirred

Correct Incorrect Correct answer

Question 62 of 66

This pictogram tells you that the material:

Can blow up

Correct Incorrect Correct answer

Can provide the oxygen needed to further fuel a fire

Correct Incorrect Correct answer

Is toxic

Correct Incorrect Correct answer

Is flammable

Correct Incorrect Correct answer

Question 63 of 66

This section gives you information that you’ll need if you get a hazardous product on your skin:

Section 16 – Other Information

Correct Incorrect Correct answer

Section 4 – First Aid Measures

Correct Incorrect Correct answer

Section 9 – Physical and Chemical Properties

Correct Incorrect Correct answer

Question 64 of 66

Where would you find information on an SDS about the best place to put a product when you’re not using it?

Section 2 – Hazard Identification

Correct Incorrect Correct answer

Section 10 – Stability and Reactivity

Correct Incorrect Correct answer

Section 7 – Handling and Storage

Correct Incorrect Correct answer

Section 6 – Accidental Release Measures

Correct Incorrect Correct answer

Question 65 of 66

Where can you find information about what types of products you should use to absorb a chemical that has spilled onto the floor?

Section 5 – Fire fighting measures

Correct Incorrect Correct answer

Section 6 – Accidental release measures

Correct Incorrect Correct answer

Section 8 – Exposure controls / Personal protection

Correct Incorrect Correct answer

Section 10 – Stability and reactivity

Correct Incorrect Correct answer

Question 66 of 66

What section of an SDS tells you what PPE is required to be used when working with the product?

Section 10 – Stability and Reactivity

Correct Incorrect Correct answer

Section 2 – Hazard Identification

Correct Incorrect Correct answer

Section 9 – Physical and Chemical Properties

Correct Incorrect Correct answer

Section 8 – Exposure controls / Personal protection

Correct Incorrect Correct answer

Lift Truck Fundamentals Final Exam

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question

27. Question

28. Question

29. Question

30. Question

31. Question

32. Question

33. Question

34. Question

35. Question

36. Question

37. Question

38. Question

39. Question

40. Question

41. Question

42. Question

43. Question

44. Question

45. Question

46. Question

47. Question

48. Question

49. Question

50. Question

51. Question

52. Question

53. Question

54. Question

55. Question

56. Question

57. Question

58. Question

59. Question

60. Question

61. Question

62. Question

63. Question

64. Question

65. Question

66. Question